As an automobile owner, there are a few things that are sure to be a constant source of irritation. One of them is professional locksmith problems. These problems can manifest in different ways, from a key that refuses to turn in the ignition to a door that just won’t unlock. But regardless of the specific issue you’re experiencing, the result is the same: frustration and inconvenience.
Fortunately, many of the most common professional locksmith problems have straightforward solutions. In this article, we’ll take a look at some of these problems and provide some guidance on how to fix them.
Key Won’t Turn In The Ignition
This is one of the most frustrating auto lock problems you can encounter. You insert the key into the ignition, but it just won’t turn. There are a few possible causes of this problem. One is that the steering wheel is locked. If this is the case, try turning the steering wheel back and forth while simultaneously trying to turn the key. This should free up the steering wheel and allow you to turn the key.
Another possible cause is a damaged or worn-out key. If you have a spare key, try using it. If the spare key works, then the problem is with your primary key. You may need to have a new key made by a locksmith or your dealership.
Key Won’t Turn In The Door Lock
If your key won’t turn in the door lock, the problem may be due to a worn-out or damaged key. In this case, try using a spare key. If the spare key works, then you’ll need to have a new key made.
Another possible cause of this problem is a frozen lock. This can happen if the lock is exposed to moisture, such as rain or snow. To fix this problem, try using a lock de-icer. You can purchase this at an auto parts store or online. If the lock de-icer doesn’t work, you may need to use a hairdryer to heat up the lock.
Key Fob Won’t Work
If you have a keyless entry system, your key fob may stop working. This can happen if the battery in the key fob is dead. Try replacing the battery and see if this solves the problem.
If replacing the battery doesn’t work, the problem may be due to a faulty key fob. In this case, you’ll need to have the key fob replaced.
Power Door Locks Don’t Work
If your power door locks don’t work, the problem may be due to a blown fuse. Check your owner’s manual to see where the fuse box is located and which fuse is for the power door locks. If the fuse is blown, replace it with a new one.
If the fuse isn’t the problem, the issue may be with the power door lock actuator. This is the mechanism that actually locks and unlocks the doors. If the actuator is faulty, you’ll need to have it replaced.
Door Lock Sticks
If your door lock sticks, it can be difficult to lock and unlock the door. This can be due to a buildup of dirt or debris inside the lock. To fix this problem, try spraying some WD-40 or a similar lubricant into the lock. This should help loosen up any dirt or debris.
If the lock still sticks after applying lubricant, the problem may be due to a worn-out professional locksmith mechanism. In this case, you’ll need to have the lock replaced.
Door Lock Won’t Stay Locked
If your door lock won’t stay locked, the problem may be due to a faulty latch. The latch is the part of the door lock mechanism that actually keeps the door locked. If the latch is faulty, it won’t be able to keep the door locked.